Get in Gear: Used Oil & Filter Recycling in San Francisco

You’re almost done with the oil and filter change on your bike, but what do you do with your used oil and filter? Whether you’ve got a Yamaha V-Star 650 Cruiser, a Dry-Sump Suzuki DR350 Enduro, a BMW R1150RT or any other ride, the job isn’t done until you’ve recycled your used oil AND filter.

Oil and filter change class at Moto Guild in San Francisco.

Where to recycle your used oil and filter depends on where you live. We’re focusing on San Francisco for this post, but the options are similar no matter where you live in California (find details for your city or county here).

Pick up free oil and oil filter drain containers like the ones above at a Riders Recycle event near you.

Get in gear.
The first step is prep. Fully drain the oil AND filter – ideally overnight to catch all the oil. Residents can pick up free oil and filter drainer containers like the ones in the picture above at upcoming Riders Recycle events in San Francisco. Use a funnel to pour all the oil into a clean, sturdy, leak-proof plastic container with a screw-on cap. Place the empty oil filter in a sealed plastic bag. Be sure to keep the oil clean – don’t mix it with any other substances so that it can be recycled again and again. If it does get contaminated, you’ll need to take it to your local Household Hazardous Waste (HHW) Collection Facility (read more below).

Local resident drops off used oil and filter at a collection center.

Take it on the road.
San Francisco has more than 20 drop-off locations where residents can take their used motor oil and filters for free, including auto parts stores, repair shops and recycling yards. San Francisco Environment created a map of all the used motor oil and filter recycling collection centers, so you can easily find the closest center to drop-off your used oil and filters. Be sure to call ahead to verify hours and limitations, and make sure to give materials to a staff member. 

Mixed up?
Not sure if your oil is mixed with other materials? If you have mixed materials, more than five gallons of used motor oil, or other hazardous waste such as batteries, paint and brake fluid, you can schedule a free pick-up by calling (415) 330-1405. Visit the San Francisco Recology HHW website for more details.

Used oil and filter sealed and ready for recycling.

For more useful info on motorcycles, DIY oil changing, and to pick up free oil and filter recycling gear – check out our other Riders Recycle blog posts and upcoming events!

Seal It Up & Drop It Off: Recycling Used Oil & Filters in Sacramento

Change your own oil and filters? Whether you’ve got a Yamaha V-Star 650 Cruiser, a Dry-Sump Suzuki DR350 Enduro, a BMW R1150RT or any other ride, the job isn’t done until you’ve recycled your used oil AND filter. Both the oil and the steel in oil filters can be cleaned and used over and over again if they’re recycled. Though we’re focusing on the City of Sacramento for this post, the options are similar no matter where you live in California (find details for your city or county here).

Get in gear.
The first step is prep. Fully drain the used oil AND filter – ideally overnight to catch all the oil. Residents can pick up free, reusable oil and filter drainer containers like the ones in the picture below at upcoming Riders Recycle events in Sacramento. Use a funnel to pour all the oil into a clean, sturdy, leak-proof plastic container with a screw-on cap. Place the empty oil filter in a sealed plastic bag. Be sure to keep the oil clean – don’t mix it with any other materials so that it can be recycled again and again. If it does get contaminated, you’ll need to take it to your local Household Hazardous Waste (HHW) Facility (read more below).

Take it on the road.
Sacramento has 50 Certified Collection Centers (CCCs) where residents can take their used motor oil and filters for free (and some will even pay you 40¢ a gallon), including auto parts stores, repair shops and recycling yards. Most centers will take up to 5 gallons of used oil at a time. Always call ahead to verify hours and limitations, and make sure to give your sealed used oil and filters to a staff member. 

Park it at the curb.
City of Sacramento residents can conveniently recycle used motor oil and filters at the curb with an appointment. Call Customer Service at 311 or (916) 264-5011 to schedule your appointment up to 48 hours before the next regularly scheduled recycling day. A maximum of two (2) gallons of used oil are accepted per appointment. Pour used oil in a clean, clear one-gallon plastic jug (like a milk or water jug) and secure the cap with tape. Put your drained oil filter in a sealed, leak-proof bag with the holes up. Place sealed containers at the end of your driveway by 6:00am for pickup on your appointment day.

Mixed up?
If your used motor oil is mixed with other materials, you have more than five gallons of used motor oil, or you have other hazardous waste such as batteries and brake fluid, you can take it to the Household Hazardous Waste Facility located at the Sacramento Recycling and Transfer Station (8491 Fruitridge Rd). Open Tuesday through Saturday, 8am to 5pm, the Sacramento HHW Facility also has a Reuse Store with free paints, cleaners and other household products available to the public!

For more useful info on motorcycles, DIY oil changing, and to pick up free oil and filter recycling gear – check out our other Riders Recycle blog posts and upcoming events!

Finish the Job Right: Oil & Filter Recycling in San Mateo County

You’ve finished the dirty work and now your bike has fresh oil and a shiny new filter, but what do you do with your used oil and filter?

Yamaha V-Star 650 Cruiser, ready for her oil change, tools and supplies at hand.

Our team has shown the step-by-step of oil and filter changes on several popular blog posts over the years – a Yamaha V-Star 650 Cruiser, a Dry-Sump Suzuki DR350 Enduro, and a BMW R1150RT. Just like the oil and filter change, exactly how and where to recycle the used oil and filter depends on where you live. For this post, we’re focusing on San Mateo County, but the options are similar no matter where you live in California (find details for your city or county here).

Used oil filter drains overnight – pick up a free drainer container at a Riders Recycle event near you.

Get in gear.
The first step is prep. Fully drain the oil AND filter – ideally overnight to catch all the oil. If you’ve been stockpiling oil filters, be sure they’re fully drained. Residents can pick up free oil and filter drainer containers like the one in the picture above at upcoming Riders Recycle events in San Mateo County. Use a funnel to pour all the oil into a clean, sturdy, leak-proof plastic container with a screw-on cap. Place the oil filter in a clean, sealed plastic bag. Depending on where you live, you might be able to get free jugs and filter bags delivered directly to your door (find your city below for details). Be sure to keep the oil clean – don’t mix it with any other substances so that it can be recycled again and again. If it does get contaminated, make sure to take it to your local Household Hazardous (HHW) Facility (read more below). Once your oil and filter are secure, you can either take it on the road or park it at the curbside for recycling – keep reading to decide what’s best for you.

Local San Mateo County resident drops off used oil and filter at a local collection center.

Take it on the road.
San Mateo County has over 50 drop-off locations where any county resident can take their used motor oil and filters for free, including auto parts stores, repair shops and recycling yards. San Mateo County Environmental Health Services created a map of all the used motor oil and filter recycling collection centers, so you can easily find the closest center to drop-off your used oil and filters (see map below). Always call the drop-off location first to verify hours and limitations, and make sure to give materials to a staff member.

Park it at the curb.
If you live in a single-family home in one of the cities listed below, you have access to convenient curbside oil and filter recycling! Depending on where you live and your waste hauler, you might need to prep your oil and filter a little differently to guarantee it will get picked up. Find your city below for details on what’s accepted and how to prep.

Used motor oil and filter after an oil change, sealed and ready for recycling.

Atherton, Belmont, Burlingame, East Palo Alto, Foster City, Hillsborough, Menlo Park, Redwood City, San Carlos, and San Mateo
According to Recology San Mateo County’s website, if you’re a single-family home resident, you can put used motor oil in a clear plastic container and filters in a zippered plastic bag next to your blue recycle cart for pickup on your regular collection day. You can request up to five one-gallon plastic jugs for your used motor oil and up to five zippered plastic bags for your used oil filters, at no cost. You can also use your own clear zip-top plastic bags and clear plastic screw-top containers for used motor oil, like a one-gallon milk jug. Make sure that lids and bags are tightly sealed.

Used motor oil and filter placed next to the recycling cart for curbside pickup.

Portola Valley and Woodside
GreenWaste provides free curbside recycling for used oil and filters, but you have to use their jugs and bags. To order the free jugs and bags, call customer service at 650.565.3900. When you’re done, place sealed jugs with oil and sealed bags with filters next to your recycling cart for collection.

Colma, Daly City, and Half Moon Bay
Republic Services Allied Waste takes up to two one-gallon, clear plastic jugs (with screw-top cap) of used motor oil and up to two one-gallon clear zip-top plastic bags with used oil filters curbside on your collection day. Place well-labeled motor oil and oil filters next to your blue recycling cart.

Brisbane, Millbrae, and South San Francisco
South San Francisco Scavenger will take up to five gallons of oil in sealed plastic bottles with screw-on lids, placed next to the recycling cart. Empty oil filters in a clear zipper-locked bag go inside the recycling cart on top of bottles and cans.

La Honda, Loma Mar, Pescadero and San Gregorio
Kunz Valley Trash & Recycling takes used motor oil in plastic jugs with screw-top lids and used filters inside secure zipper-locked plastic bags. Place both next to your recycling cart. Call 831.338.0500 before your scheduled pickup if you have more than the usual amount for a single auto or pick-up truck.

The San Mateo County Household Hazardous Waste Facility is open for free collection Thursday through Saturday – call 650.363.4718 to make an appointment.

Mixed up?
Not sure if your oil is mixed with other materials, or have other Household Hazardous Waste (HHW – such as paint, antifreeze, or insecticide) to get rid of as well? San Mateo County residents can drop up to ten gallons or fifty pounds of contaminated oil and other HHW off for free Thurs-Sat at the San Mateo County HHW Facility. Call 650.363.4718 and select option 3 or visit the San Mateo County Environmental Health Services HHW website to make an appointment at a drop-off location near you.

For more useful info on motorcycles, DIY oil changing, and oil and filter recycling – check out our other blog posts and the rest of the Riders Recycle site.

Oil Analysis–A Way to Extend Oil-Change Intervals and Know Your Engine?

Recently, I saw yet another contentious motorcycle oil-change thread on my local motorcycle forum. All the usual questions came up–what’s the best type of oil for my bike, conventional or synthetic? Which brand is superior? How long can I stretch my oil-change intervals without hurting the bike’s engine? Of course, some posters passionately advocated synthetic, others insisted that cheaper conventional oil was fine; heck, even the usual Shell Rotella advocates and Amsoil fanboys climbed out from under their rock and held forth. Some guys told our questioner to go read his manual; the old-fashioned types insisted that the time-honored 3,000-mile interval should be his guiding light; the cheap guys said that he could go 8-10,000 miles on synthetic, easy.

It’s true that oil has a tougher job in motorcycle engines than it does in cars; bike engines tend to run hotter and rev much higher than car and truck engines. More importantly, while car engines have separate lubrication systems for the automatic transmission or clutch and the engine, most bikes share a single pool of oil, circulating between the clutch and the engine alike. This means that motorcycle oil endures shearing forces from the meshing of gears in the transmission, as well as increased amounts of particulate and carbon shed from its fiber clutch plates. That’s why, while some car manufacturers recommend oil-change intervals of 9-10,000 miles, most motorcycle makers stick to 3–6,000 miles for their recommendations.

Amid all the arguing, one guy mentioned that several places in the U.S. offer oil analysis, which gives a breakdown of what’s going on in your engine, and can tell you whether or not your oil-change interval is too long, too short, or just right. In addition, oil analysis offers an opportunity to see what’s going on, chemically and structurally, inside your engine. Is the head cracked and leaking coolant into your oil? Is there fuel contamination, or excessive silica, meaning you have a fueling problem or aren’t changing the air filter often enough? Are your pistons and bearings in good shape, or are they shedding aluminum and copper? Each oil sample is tested using chemical spectrometry, testing for viscosity, fuel and antifreeze contamination, as well as suspended particles in the oil that are shed from the various metals and surfaces inside your engine.

Testing the oil gives a representative portrait of what condition your engine is in, and can anticipate engine problems before the vehicle clatters to an unplanned stop in a cloud of smoke 100 miles out of Wichita. Also, part of the test can involve a recommendation for just how long your next oil change intervals ought to be, based on the current condition of the oil. In a best case scenario, you can lengthen your oil change intervals, which uses less oil (and fewer filters) in the first place. You save time and money, and you reduce oil waste as well–that’s even better than recycling your oil (though of course you should still do that, too)!

For more detailed information on just what oil analysis analyzes, Bob Is The Oil Guy has further info.

I was intrigued, and decided to geek out and go for it. I looked up Blackstone Laboratories in Indiana, and emailed to request a free testing kit. It arrived a couple of weeks later.

The package from Blackstone Labs

The package from Blackstone Labs

Inside, a mysterious bottle.

Oil sample bottle

Oil sample bottle

Opening it, I found the contents of the testing kit.

Contents of the oil testing kit: Outer bottle, inner oil sample bottle, ziploc for the inner bottle, absorbent cloth to wrap around inner bottle, report sheet, and window decal

Contents of the oil testing kit: Outer bottle, inner oil sample bottle, ziploc for the inner bottle, absorbent cloth to wrap around inner bottle, report sheet, and window decal

It contained:
* The outer bottle,
* inner oil sample bottle,
* ziploc for the inner bottle,
* absorbent cloth to wrap around inner bottle,
* report sheet, and
* a window decal, to write down the mileage of your vehicle at this oil change.

It turned out that I’d just changed my motorcycle’s oil, but my car (a 2001 Suzuki Grand Vitara) was due, so I decided to use it as a guinea pig. Besides, it was a chance to learn to change the oil and filter on this vehicle and get an oil sample, instead of giving in to the temptation of going to the local quicky-lube place. I picked up some Mobil 1 Full Synthetic, a new filter, a fresh crush washer for the drain bolt, my oil kit, and set to work. Blackstone Labs requests that the oil sample come from a completely warmed-up engine, so I made sure to do the oil change after I’d returned from a mid-length trip.

Suzuki Grand Vitara, set up for an oil change

Suzuki Grand Vitara, set up for an oil change

Oil change supplies

Oil change supplies

I chocked the rear wheels, placed my jack and elevated the front end of the SUV, and put the jackstands under the frame. I put down some cardboard to lie on, some more to catch any spills, and placed my oil drain pan to catch the flow.

I got the oil-sample bottle ready. Blackstone suggests taking the oil sample from the middle of the oil flow once the drain bolt is removed, rather than the beginning or end. This gives the most accurate picture of the bulk of the oil circulating through the engine. When I got under the vehicle to loosen the drain bolt and drop the oil, I kept the sample bottle close to hand.

oil sample bottle

oil sample bottle

Crawling under the car with my socket wrench and oil sample bottle, I loosened the drain bolt.

Loosening the drain bolt

Loosening the drain bolt

As I removed the oil drain bolt and the hot oil splashed out, I waited a couple of seconds, then held my sample bottle under the flow of oil–trying not to burn myself!

Drain pan and sample bottle full of used oil

Drain pan and sample bottle full of used oil

When my sample was secure and the oil drained, I removed the oil filter, then replaced it with a new one. In the 2001 Suzuki Grand Vitara, the filter is mounted on the side of the engine case, making filter removal and replacement an exercise in messiness and creative contortionism.

Replacing the oil filter

Replacing the oil filter

To check the recommended oil-change interval on your own car/truck, refer to your manual, or check out CalRecycle’s Check Your Number website. Sadly, no motorcycles, but it’s still a useful resource.

Once the filter was on, I put a fresh crush washer on the drain bolt, torqued it down, and added 5 quarts of oil (Mobil 1 full synthetic 5w30, to be exact). I started the car and ran it for a few minutes, then stopped it, waited 5 minutes, and topped off. I took a short spin and checked the oil level again–it was fine.

My filter went into my oil filter drainer, the oil drain pan I capped and wiped down, and took both into my local auto parts shop for recycling–of course! For where to recycle oil and filters in northern California, visit Riders Recycle. CalRecycle has a zip-code lookup tool for all CA oil/filter recycling locations.

With my oil sample captured, I wiped down the bottle and bagged it, wrote down the relevant information on the enclosed sheet, wrapped the whole bundle up in the absorbent mat, closed and taped the outer bottle, and dropped it off at the Post Office in a tyvek Priority Mail envelope.

Oil sample, ready to package up and send in to the lab

Oil sample, ready to package up and send in to the lab

After 10 days, I got the oil analysis report back, attached to an email! With a little excitement, I printed out the info sheet.

Oil Analysis report

Oil Analysis report

Aside from the elevated copper levels (which are, I’m told, usually the result of an oxidizing oil cooler shedding copper, and not worrisome when other metals are not elevated), the results were darn good. Even with the analysis being based on oil that had gone 3,600 miles (I’d gone 5,000 miles between changes), the levels of metals and other contaminants in the oil were within expectations. The viscosity of the old oil held steady as well, ensuring that the internal engine parts would still have their necessary lubricant film. There were no traces of fuel or coolant in the sample. In the end, the lab recommended that I extend the Suzuki’s oil-change intervals to 7,000 miles. That saves a fair bit more oil from entering the waste stream, uses fewer filters, and, happily, saves me some effort and money, while not harming my engine. Just the result I’d been hoping for.

A number of companies offer oil analysis. I used Blackstone Laboratories, which has a good reputation and charges $25 per basic sample, and $10 extra for a TBN (total base number) test, which tests how many of the oil’s additives are still working in your sample. The TBN tells you whether you can extend oil change intervals, and recommends a particular mileage, and added to the standard test, comes out to $35 total. Since a synthetic oil and filter change costs $83 at my local oil changer, and I paid $41 for 5 quarts of synthetic oil and a filter, I saved $8, got a view into the working condition of my engine, and got scientifically-backed advice that will save me money and time in the future, and got a chance to to save resources and reduce pollution and oil use. Seems like a win all ’round.

When it comes to oil, as with anything else, reducing is even better than recycling.

Blackstone Labs

Oil Analyzers, Inc.

Oil and Filter Change: Yamaha V-Star 650 Cruiser

To prepare for an oil change on my neighbor’s 2004 Yamaha V-Star 650 cruiser, I gathered up my tools, laid down some cardboard to catch spills and drips, prepped my recycling containers, and readied the fresh oil and filter. She rode the bike enough to warm it up, then rode it over to my place, so the oil would be nice and warm, and flow out easily when drained.

The V-Star, ready for her oil change, tools and supplies at hand

The V-Star, ready for her oil change, tools and supplies at hand

getting ready

getting ready

Supplies needed:
* 3-4 quarts of 20w50 viscosity motor oil (my neighbor chose Castrol motorcycle-specific synthetic oil). If you choose regular car oil rather than motorcycle oil, the round label on the back should NOT read “energy conserving”. If it does, your clutch may slip from the extra-slippery additives in the oil, intended for use in cars and trucks.
* Fresh crush washer
* Fresh Filter
* Rags/paper towels for cleanup
* ziploc bag to recycle filter after draining
* Latex or nitrile gloves to protect your hands from toxic oil

Tools Needed:
* Socket wrench and/or 17mm metric wrench
* Size 4 and 5 allen wrenches
* funnel
* oil pan
* container for recycling oil

(Find out how to get free oil and filter drainer gear and recycle your oil and filters in San Mateo County, San Francisco, Alameda County, Sonoma County, Napa County, Marin County and Sacramento.)

Yamaha has been making the V-Star 650 motorcycle, with only cosmetic changes, from 1998 to the present. The oil and filter change procedure for all these bikes is substantially similar for all of ’em.

To get the oil pan under this low-slung cruiser, we propped the kickstand up on a brick, giving a little extra room to push the pan beneath the engine.

To get the oil pan under this low-slung cruiser, we propped the kickstand up on a brick, giving a little extra room to push the pan beneath the engine.

After pushing the pan beneath the bike, I got down on the ground on the left side to locate the oil drain bolt. The oil drain bolt is on the rider’s left side of the bike, tucked beneath the frame rail, on the lower left side of the oil pan. I wiggled my 17mm socket onto the bolt and wrenched it loose.

Oil drain bolt on left of oil pan

Oil drain bolt on left of oil pan

The oil drain bolt is reached on the left side of the bike, beneath the frame rail, on the left side of the oil pan.

The oil drain bolt is reached on the left side of the bike, beneath the frame rail, on the left side of the oil pan.

The oil poured out, a small amount of it missing the pan and making a bit of a mess–on the cardboard, fortunately. Oil-contaminated runoff is toxic, so better on cardboard than on your driveway.

Oil draining--most of it into the oil pan!

Oil draining–most of it into the oil pan!

I added a new crush washer to the oil drain bolt and set it aside.

oil drain bolt, with new crush washer

oil drain bolt, with new crush washer

While the engine oil continued to drain, I moved to the filter. The V-Star 650 has a 2-part decorative cover over the oil filter housing, and both pieces need to be removed separately to access the filter. Using my allen wrench, I pulled the 3 bolts from the outer cover and removed it. Allen (also known as hex head) bolts can strip out and cause more trouble than anyone needs, so I used high-quality allen wrenches or socket bits, and used a careful hand to make sure the bolts came out smoothly.

Removing the outer cover of the oil filter housing

Removing the outer cover of the oil filter housing

Outer oil filter cover, removed

Outer oil filter cover, removed

I carefully kept the 3 allen bolts with the outer cover, then began to undo the allen bolts of the inner cover.

Removing allen bolts from the inner oil filter cover

Removing allen bolts from the inner oil filter cover

The bolts holding the inner oil filter cover are different lengths, and each must return to its proper place. Laying them out in a place they won’t be disturbed, in order, is a good idea; poking them through holes in cardboard in a way that matches the orientation of the inner cover is a good way to do it as well.

Inner oil filter bolts, different lengths

Inner oil filter bolts, different lengths

Removing the inner filter cover

Removing the inner filter cover

One of the allen bolts holding the inner oil filter cover is tough to get to–the rear brake pedal prevents access to its head. Try different types of allen wrenches and sockets, and most importantly, press the rear brake down with one hand while putting the tool on the bolt with the other. Again, be careful not to strip out the allen bolt–it’s easy because of the awkward access. The inner cover should be carefully handled when you remove it, too, so you don’t harm its gasket. If it does get damaged, it must be replaced or it will leak.

Pressing down rear brake pedal to access that last pesky bolt

Pressing down rear brake pedal to access that last pesky bolt

At last, I arranged all the different-length bolts in order, removed the oil filter cover, and pulled out the oil, used oil filter.

Success! The old oil filter, accessible after removing the filter cover.

Success! The old oil filter, accessible after removing the filter cover.

With the filter removed, I checked the empty oil filter housing for debris, sludge, or other problems, wiping it out with a rag.

The oil filter housing, empty

The oil filter housing, empty

I placed the oil filter on its spike in my oil filter drainer. They can also be simply drained out over your oil pan, or on a spike or rack in the pan. Whatever method you use, the filter should drain at least overnight before you bag it in a ziploc bag and recycle it alongside your oil.

Old filter, in its filter drainer

Old filter, in its filter drainer

Now, it was time to install the new oil filter.

New filter ready to go

New filter ready to go

I checked all the o-rings and made sure I was inserting the new filter in the correct direction.

Inserting the new filter

Inserting the new filter

Carefully, I held the inner oil filter cover in place, and installed the varying-length bolts around its perimeter in the proper order. I torqued each bolt down gently but securely (the spec in the manual is 10Nm, or 7 ft-lb., so not much), not wanting any to strip or snap, and accessed the head of the last bolt by pressing down the rear brake pedal, as before. I also tightened the bolts in a diagonal or star pattern, so that the aluminum cover would not warp from uneven pressure.

Replacing the inner filter cover

Replacing the inner filter cover

Once the inner filter cover was secure, I replaced the outer filter cover.

Replacing the outer filter cover

Replacing the outer filter cover

With the new filter in place, I slid out the used oil pan and replaced the cap, setting it aside to recycle.

Pulling out the now-full oil pan

Pulling out the now-full oil pan

Making sure that the new crush washer was on the oil drain bolt, I re-inserted it and torqued it down firmly–but not harshly. You want to gently smush the crush washer without damaging the aluminum threads or case. If you use a torque wrench, the manual calls for 43 Nm (31 ft-lb) of torque on the drain bolt.

I opened the oil-filler cap and placed a long-necked funnel in the opening.

Funnel in place to re-fill the engine

Funnel in place to re-fill the engine

The oil capacity of the V-Star 650 is 2.97 quarts; the bike owner had 4 quarts on hand just in case–a wise move.

Fresh new oil

Fresh new oil

I poured in 2 quarts of oil, then figured I should check the oil sight glass to monitor the rising oil level. The sight glass is low on the left side of the bike; it’s easier to have an assistant hold the bike upright while you sit or crouch and look at the sight glass. It’s in the middle of the photo below.

The oil sight glass, just visible on the side of the engine

The oil sight glass, just visible on the side of the engine

I poured oil and checked the sight glass repeatedly, with my helper holding the bike upright, until the sight glass was completely full. I let the oil settle for a couple of minutes, then started up the bike and let it run for 3 minutes to circulate the new oil through the engine and filter. The level dropped somewhat, once I’d allowed the bike to cool for another 3-5 minutes, so I topped off the level and started the bike for another 3 minutes, then waited for another 3-minute cooldown.

Pouring in fresh oil

Pouring in fresh oil

After a couple of running and cooling down cycles, the oil level was perfect–almost to the top of the sight glass.

The V-Star 650, ready to ride. Glad that cardboard was there!

The V-Star 650, ready to ride. Glad that cardboard was there!

Glad that cardboard was there to prevent an oily mess in my driveway! The bike had a fresh oil and filter, and I put my tools away, cleaned up, and sealed the used oil in jugs and the used filter in my drainer for later recycling. I’m lucky enough to have an auto parts store that recycles oil a mile from my home, and that’s where I took the oil and filter for recycling.

Find out how to easily recycle your used oil and filters in San Mateo County, San Francisco, Alameda County, Sonoma County, Napa County, Marin County and Sacramento. If you’re not in those counties, find your own convenient oil and filter recycling location HERE.

Note: Several of these photos were taken by the bike owner, Sue Bennett. Thanks Sue, two hands are better than one!

Bill’s garage: Oil change for the ’02 BMW R1150RT

As you’ve seen, changing the oil and filter on a motorcycle is a relatively simple task that even a beginner can do. Servicing this BMW sport-tourer is no different. Here’s a straightforward how-to on the bike.

Everything you need except the torque wrench and the beer.

First, assemble your tools and parts. You’ll need four liters of moto-specific oil. I use Castrol 20-50 4T because it’s cheap and they stock it at my local auto parts store. My filter is a Hiflofiltro HF163 ($9.95) instead of the BMW-branded filter at $18.95. In addition, you’ll need two new crush washers and shop towels.

For tools, you’ll need a torque wrench, a ratchet, a 76mm filter wrench, an 8mm allen head wrench or driver, an oil catch pan and a funnel. An aftermarket service manual is a nice thing to have, too.

(Find out how to get free oil and filter drainer gear and recycle your oil and filters in San Mateo County, San Francisco, Alameda County, Sonoma County, Napa County, Marin County and Sacramento.)

Knowledge is power. Always have a shop manual nearby.

Get the bike hot and park it on the center stand. No need to remove the fairing. You can reach everything. Postion the catch pan and remove the drain plug with the 8mm driver. The plug is located on the bottom of the engine case. Be careful not to let it fall in the oil.

Drain plug with oil filter on right. Pink Schwinn in background.

Thar she blows!

Discard the old crush washer in a place where you won’t accidentally reuse it.

Clean plug and new crush washer.

Next, grab your filter wrench and ratchet and remove the filter. It is in a recessed spot near the drain plug. If the rubber gasket is not in the old filter when you take it out, check to be sure it isn’t stuck to the case. If so, reach up and pull it out.
Prepare your new filter by filling it with oil and spreading a bit of oil on the rubber gasket to help the seal.

Priming the filter and wetting the seal

Clean off any grit from the engine case before installing the new filter. The filter should be torqued to just 8 foot-pounds or about hand-tight.

You put the lime in the coconut … or something like that

Going up. Installing the filter.

Clean the drain plug, put a new crush washer on it and install it, torquing it to 23 foot-pounds. Don’t overtighten.
Now you’re ready to fill the bike with oil. It will take about 3.75 liters. Don’t overfill it. It goes in the oil cap atop the left cylinder head. I use a small funnel and pour the oil carefully, so it doesn’t spill on the engine.

Oil goes in da hole.

Check your oil level by looking at the sight glass below the cylinder and behind the fairing. A flashlight helps to see it.
Finally, start the bike and check for leaks.
Pour the old oil in a jug and take it back to the auto parts store to recycle it. Find out how to easily recycle your used oil and filters in San Mateo County, San Francisco, Alameda County, Sonoma County, Napa County, Marin County and Sacramento. If you’re not in those counties, find your own convenient oil and filter recycling location HERE.

High-tech records management system

I usually write the mileage and date on a piece of masking tape and stick it somewhere on the fairing. In 6,000 miles or so, I’ll change the oil and filter again.
You’re done!
–BV

Scooter Time! Change the Oil on That Honda Elite 80

Changing your own oil makes for an easy and satisfying Do-It-Yourself project requiring a minimum of tools and supplies, saves you money at the bike shop or dealership, and helps you learn to keep your scoot purring along in fine mechanical shape. It’s an easy job, and the Elite has no oil filter. The Elite 80 has a little square on its dashboard, usually green, that switches to red every 3,000 miles. This indicates that it’s time to change your oil…though in practice, I’ve seen many scooter mechanics advocate changing the oil every 1,000 miles, just to be sure. In any case, the oil on this little scooter was 2100 miles and over a year old, so I prepped for an oil change.

Supplies you'll need to change the oil on a Honda Elite 80

I gathered all the supplies I’d need–

  • the Honda,
  • a jug of 10w40 oil (plain ol’ automotive oil is fine, as long as it does not have an “Energy Conserving” label on the back),
  • pan,
  • funnel,
  • a cleaner or solvent (I like Winzer MPS-100, but Simple Green is fine too, with a rinse afterward)
  • a jug for waste oil,
  • an 8mm metric allen or hex wrench to remove the oil drain bolt,
  • nitrile gloves to keep my hands clean,
  • paper towels or rags for cleanup,
  • and a new crush washer.
  • With everything I needed at hand, it was time to change some oil. First, to drain the oil in a small scooter effectively, you often need to tilt the machine to help it drain. I placed a board under the right foot of the scooter’s center stand, to help the scoot lean and drain to the left.

    Note the board placed under the right foot of the centerstand--to help the oil drain

    Here, you can see how I tilted the scooter up and placed the oil pan directly underneath the centerstand, with the left foot of the stand actually sitting in the pan. If you aren’t comfortable slinging the scooter around at such sharp angles, you could use a large funnel to catch the oil and direct it over into the pan.

    I located the drain bolt on the left side of the scooter’s engine.

    The red arrow indicates the oil drain bolt

    Other views of the tilted scooter.

    Maximizing oil drainage with oil pan and board propping up the scooter at an angle

    From behind, this shows the tilt of the scooter when placed on a board for drainage

    I used the 8mm allen wrench to loosen and remove the drain bolt.

    Removing the oil drain bolt

    With the drain bolt out (be careful not to burn your hands if the engine and oil are hot), the oil can flow freely into your catch pan.

    With the drain bolt gone, the oil begins to drain

    Remember, if the scooter is warm when you start, the oil will drain more quickly and effectively.

    Allen/hex wrench (metric size eight) with oil drain bolt

    After waiting a while for the oil to completely drain, I moved on to the next step.

    On the other side (the right side) of the scooter, I unscrewed the oil filler cap/dipstick in preparation for filling the scoot with oil.

    Then, I pulled off the old crush washer, added a new one, and replaced the oil filter bolt. Use awareness and careful feel to tighten the drain bolt–you want to slightly compress the crush washer and ensure that the bolt isn’t so loose that it works its way out, but avoid stripping the aluminum threads in the scooter’s small oil pan. Have an experienced friend or family member help you with getting the feel for bolt tightness if you feel hesitant.

    Replacing the oil drain bolt and new crush washer

    Then, with the bolt replaced and the oil drained, I was ready to take care of the old stuff and add fresh oil. I wanted the scooter to be level and perpendicular to the ground to get an accurate measurement of the oil level, so I removed the board from beneath the right side of the center stand.

    Then, I moved around to the left side, and tilted the scooter over to the right to pull the center stand completely out of the oil pan.

    Leaning the scooter so the center stand is no longer in the oil pan

    I leaned the scooter waaay over, and pushed the oil pan out from under the center stand carefully, taking care not to tip it over.

    Leaning the scooter, and now the oil pan is clear of the center stand

    With the old oil safely out of the way and the scooter level again, it was time to pour in the fresh oil. I put a funnel in the oil filler neck and slowly added oil, stopping to check the level with the dipstick frequently. A funnel with a long neck or, better yet, a flexible neck, is needed to reach the filler opening on the Elite 80–it’s pretty far down there..

    Adding oil

    Checking the level (the oil capacity is 3/4 of a quart–not much, be careful not to overfill)…

    Checking oil level--should be to the top of the checkered area on the dipstick

    And with the fresh oil in, it’s time to spray some cleaner on the oily areas beneath the scooter (if you use Simple Green, remember to rinse with water), and then to take care of the old oil. Any sturdy container with a secure cap will do for transporting the oil for recycling–I had a screw-top laundry detergent bottle rinsed and ready to go.

    Draining old oil into a container for recycling

    Draining oil into a bottle--I'll be taking this jug down to my local O'Reilly's for recycling

    The last step is to start and run the Honda for a minute or two, the turn it off, let the oil settle for 3-5 minutes, and check the level on the dipstick again, adding oil bit by bit if necessary. This allows the oil to circulate through the engine and level itself out. Remember, on Hondas and Japanese bikes and scooters in general, you check the oil level by simply setting the dipstick into its hole, not by screwing it all the way in.

    Once you've got the level right, it's time for a ride

    With that, you’re done. Give yourself some props for your mechanical accomplishment, then think about heading out for a ride…your scooter with run all the better with fresh oil!

    Don’t forget, of course, to recycle that used oil. I have curbside pickup in the city where I live, but most areas have a variety of automotive retail businesses and oil changers that will happily accept your used oil for free. For a more detailed answer about where to recycle your oil after an oil change, visit Riders Recycle’s web site.